Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Getting nzTivo Thomson Dec06 RC1 image & Turbonet Card working

  1. #1

    Red face Getting nzTivo Thomson Dec06 RC1 image & Turbonet Card working

    Hi, I'll move this question to a new thread as it's somewhat different from my original question.

    Is there anybody sucessfully using the nzTivo Thomson image with a Turbonet card?
    What process did you follow to get the networking working?

    When imaging the drive I was unable to select a networking option but I understand from jaidev Turbonet is the default and should be active. I have the Tivo connected to my D-Link 4-port Wireless/Router/Modem. I assume it is the correct cable (straight-through/crossover), and the connection is active, as I get link lights at both ends (Turbonet card and router).

    However, the Tivo doesn't show in the DHCP Client list on the router, which leads me to think it's not actively requesting an IP or is having trouble with my LAN.

    I'm thinking that perhaps I should try re-imaging the drive using the nzTivo Philips or Sony image, although I can see fiddling necessary to get the PAL Tuner working which I assume is already integrated within the Thomson image.

    Does anybody think this may resolve the Turbonet networking issue?
    Is it possible to select a specific networking option in the install process for the nzTivo Philips & Sony images?
    Maybe my copy of the Thomson image has become corrupted in the downloading or imaging process?

    Any help is much appreciated...

  2. #2
    Join Date
    Mar 2005
    Location
    Hamilton, NZ
    Posts
    196
    Quote Originally Posted by fairyland View Post
    When imaging the drive I was unable to select a networking option
    What do you mean by this? I recently used the DEC06 image, and although I have a cachecard, not a turbonet, I was able to configure its ip address etc from the installer and connect to it across the network (on a side note, the cachecard drivers on the image are out of date).

  3. #3
    ok this may indicate I have a dud image, but to answer your question:

    I followed the imaging process identified here: http://minnie.tuhs.org/twiki/bin/vie...repareTiVoDisk

    I burnt the image on a CD and from the booted menu I could confirm some details but not others. I could SELECT the appropriate drive to install the image on; I could set the swap partition. However I couldn't select a NETWORK method, or appropriate card (in my case Turbonet). There was one other thing I couldn't do but can't remember what it was - perhaps selecting the EMULATOR. Some error was given that I also can't remember, but I was able to proceed and image the disk. Assuming all was correct I installed the drive in the Tivo, booted into Guided Setup and was able to navigate through the first couple of screens. But without the networking operational I didn't proceed.

    It would appear I was unable to configure an IP address for the Tivo directly within the installer, and prior to imaging the drive? My assumption is this is where the problem lies?
    Last edited by fairyland; 21-05-2007 at 06:36 PM.

  4. #4
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,038
    I think your assumptions are correct.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  5. #5
    Join Date
    Nov 2006
    Location
    Wellington
    Posts
    79
    Have you drilled down through http://www.silicondust.com/forum/ ?
    David Hingston, Wellington, NZ
    Thomson TiVo, Cachecard 512MB, Samsung 300G, TWP 1.3.1
    Thomson TiVo, Cachecard 512MB, Seagate 320G, TWP 1.3.1
    Thomson TiVo, Cachecard 512MB, Seagate 320G, TWP 2.1 beta

  6. #6
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,038
    There are no issues with the Cachecard drivers used in either NZ or Oz.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

  7. #7
    Join Date
    Dec 2005
    Location
    Christchurch, New Zealand
    Posts
    463
    Are you sure it wrote the image correctly? Did it take about 30sec-1min to write the image to the disk? If it happened in 1 or 2 secs then it didn't work. Your drive may be locked or you are using a new PC motherboard not compatible.

  8. #8
    Yes, I am quite sure the drive is imaged correctly... well, now.

    I downloaded the RC1 Thomson image again. Tested the md5sums which checked out. Burnt image to CD with Nero. Booted with drive in PC & was able to execute the NETWORK setup properly - set DHCP and left 'oztivo' as the domain name. Selected the correct drive to image to (only one) and left the SWAP size at the default (127). Probably took longer than a minute to image the drive but certainly not 1-2 seconds.

    I still get nothing showing on my network though. Not listed as a DHCP client on my router. I've tried sharing the network connection via OSX (http://minnie.tuhs.org/twiki/bin/vie...workingWithOSX) with no luck. I've also tried re-imaging the drive with a static IP address on the TIVO but nothing doing there either. I've tried 'ping oztivo', guessing the next sequential DHCP address.

    I'm beginning to run out of ideas, and starting to think that perhaps the Turbonet card isn't working.

    Is there anybody in the Auckland area who can afford some time to help me out...?

  9. #9
    Join Date
    May 2004
    Location
    Victoria
    Posts
    1,239
    Quote Originally Posted by fairyland View Post
    I'm beginning to run out of ideas, and starting to think that perhaps the Turbonet card isn't working.
    As said in an email the other day I test EVERY card before sending to ensure they are working. Of course not withstanding the very slight possibility of something going wrong after it has left my hands I can guarantee that it is not the card.

    Having said all that I am not one to do anyone out of anything. If there is found to be a problem with the card I am more than happy to exchange or refund, no questions asked.
    Darren King
    OzTiVo Repairs and Modifications
    If your TiVo requires repairs or modifications
    then visit: http://kingey1971.wix.com/tivorepairs

    NOW ALSO REPAIRING FETCH TOO!

  10. #10
    Join Date
    Apr 2004
    Location
    Perth, Western Australia
    Posts
    3,038
    Do you have a serial cable for the TiVo? we can check to see what is running and what you have configured.

    As an option, you could try installing the current oztivo 1.6.2 Philips image. It works fine on UK TiVo's and can be set for NZ through the menus. To see if you get any difference.

    Peter.
    Please search this forum and our Website for your TiVo questions before starting a new thread. Thanks!

Similar Threads

  1. TurboNet card not starting up
    By SteveCourt in forum Question and Answer Forum
    Replies: 6
    Last Post: 01-07-2008, 06:23 AM
  2. Turbonet card schematics
    By Skolink in forum Hardware Upgrades/Mods
    Replies: 3
    Last Post: 28-08-2006, 06:38 AM
  3. Tivo & Turbonet Card
    By asokol in forum Question and Answer Forum
    Replies: 3
    Last Post: 04-12-2004, 10:37 PM
  4. which ethernet card? turbonet or cachecard?
    By elarbee in forum General Chat
    Replies: 2
    Last Post: 02-07-2004, 04:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •