Failed. Service unavailable

[sadrake]

The ISP's proxy still does not like it. as long as everything is configured correctly to use it...

rc.d.author
# Usage: %s [-d] [-h] [-l localport] [-L listenAddr] [-s serverip]
# [-p serverport]
emuProxy2 -s 64.151.65.200 &


tclient.conf
#
# This is the default port, it's values come from Addr.itcl not here
#
000:
# Dennis' Emulator
#126::66.23.218.193:80:::
# This is for the server emulator on minnie. Trouble if your ISP blocks HTTP .9
# 127::64.151.65.200:80:::

# This uses emuProxy2 to avoid problems with transparent proxy. Thanks Tim!
127::127.0.0.1:8000:::

tclient log file....

Aug 16 17:54:15 (none) comm[157]: CallService: Start err 0
Aug 16 17:54:15 (none) comm[157]: CAM_ID not found.
Aug 16 17:54:15 (none) comm[157]: CallStatusReporter: Phase: Dial, Status In Progress
Aug 16 17:54:15 (none) comm[157]: CallStatusReporter: sending message "CL|30"
Aug 16 17:54:16 (none) comm[157]: Backdoor code 4, enable calls via broadband
Aug 16 17:54:16 (none) comm[157]: Using Ethernet. Not starting modem/pppd.
Aug 16 17:54:16 (none) comm[157]: CallStatusReporter: Phase: Start_Auth, Status In Progress
Aug 16 17:54:16 (none) comm[157]: CallStatusReporter: sending message "ST|33"
Aug 16 17:54:16 (none) comm[157]: CommUtil: connection to host 127.0.0.1, port 8000, err 0x0
Aug 16 17:54:16 (none) comm[157]: Uploading HTTP Header for modLog of /var/log/svclog: POST /tivo-service/mlog.cgi HTTP/1.0^M Content-Length: 358^M ^M
Aug 16 17:54:16 (none) comm[157]: read HTTP Header: HTTP/1.0 200 OK^M Date: Tue, 16 Aug 2005 05:54:07 GMT^M Server: Apache/2.0.53^M Content-Type: text/plain; ch****t=ISO-8859-1^M X-Cache: MISS from cache1.qsi.net.nz^M Connection: close
Aug 16 17:54:16 (none) comm[157]: SvcLogRqst::verify: enter
Aug 16 17:54:16 (none) comm[157]: SvcLogRqst::verify: unlink(/var/log/svclog.upload)ed (status = 0)
Aug 16 17:54:17 (none) comm[157]: couldn't stat input file, reason = No such file or directory
Aug 16 17:54:17 (none) comm[157]: NetAgent::doXfer: open failed on Rqst : No such file or directory
Aug 16 17:54:17 (none) comm[157]: drainGetPostQ: doXfer failed err=65535 (0xffff)
Aug 16 17:54:17 (none) comm[157]: Xfer Performance Log says errors are Ok!
Aug 16 17:54:17 (none) comm[157]: CommUtil: connection to host 127.0.0.1, port 8000, err 0x0
Aug 16 17:54:17 (none) comm[157]: read 384 bytes of upload data for FourOneOneRqst
Aug 16 17:54:18 (none) comm[157]: CommUtil: connection to host 127.0.0.1, port 8000, err 0x0
Aug 16 17:54:18 (none) comm[157]: read 2000 bytes of upload data for HServerRqst
Aug 16 17:54:18 (none) comm[157]: HTTP header: HTTP/1.0 200 OK^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Date: Tue, 16 Aug 2005 05:54:08 GMT^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Server: Apache/2.0.53^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Content-Type: text/plain; ch****t=ISO-8859-1^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: X-Cache: MISS from cache1.qsi.net.nz^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Connection: close^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: ^M
Aug 16 17:54:18 (none) comm[157]: Start TCD411Resp =====================
Aug 16 17:54:18 (none) comm[157]: errMsg:
Aug 16 17:54:18 (none) comm[157]: areaCodeObj: &http://127.0.0.1:8000/tivo-static/headends/AC-002-v1.slice|
Aug 16 17:54:18 (none) comm[157]: tollFreeAuth: 0
Aug 16 17:54:18 (none) comm[157]: tollFreeNum: 0
Aug 16 17:54:18 (none) comm[157]: End TCD411Resp =====================
Aug 16 17:54:18 (none) comm[157]: HServerRqst::evaluate starting
Aug 16 17:54:18 (none) comm[157]: HTTP header: HTTP/1.0 411 Length Required^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Server: squid/2.5.STABLE3^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Mime-Version: 1.0^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Date: Tue, 16 Aug 2005 05:54:15 GMT^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Content-Type: text/html^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Content-Length: 3319^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Expires: Tue, 16 Aug 2005 05:54:15 GMT^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: X-Squid-Error: ERR_INVALID_REQ 0^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: X-Cache: MISS from cache1.qsi.net.nz^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: Connection: close^M
Aug 16 17:54:18 (none) comm[157]: HTTP header: ^M
Aug 16 17:54:18 (none) comm[157]: Required Parameter ERR_MSG not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter VERSION not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter CODE not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter SW_LIST not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter BACK_CH_PRV not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter BACK_CH_PUB not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter BACK_CH_LOG not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter TIME_SVC not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter SEQ_COOKIE not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter INV_FILE not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter NO_PRV_BACKHAUL not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter SERVICE_STATE not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter STATE_EXPIRE not present
Aug 16 17:54:18 (none) comm[157]: Required Parameter SW_SYSTEM_NAME not present
Aug 16 17:54:18 (none) comm[157]: HServerRqst: readBlock failed, err = 0xffff
Aug 16 17:54:18 (none) comm[157]: NetAgent: drainEvalQ failed, err = 0xffff
Aug 16 17:54:18 (none) comm[157]: CallService: NetAgent Process err 65535
Aug 16 17:54:18 (none) comm[157]: CallService: NetAgent failed, status 0xffff
Aug 16 17:54:18 (none) comm[157]: CallService: EndCall start

[DJC]

Hmmm, looks like the 2nd attempt got further as its recognising the area code slice....?

Heres another thing to try.. the development emulator [woooo] is on port 8000, its likely that your isp isn't transparent proxy'ing that port.

Might be worth a crack, provided you haven't got any logos loaded...

[petestrash]

Aug 16 17:54:16 (none) comm[157]: Uploading HTTP Header for modLog of /var/log/svclog: POST /tivo-service/mlog.cgi HTTP/1.0^M Content-Length: 358^M ^M

Aug 16 17:54:16 (none) comm[157]: read HTTP Header: HTTP/1.0 200 OK^M Date: Tue, 16 Aug 2005 05:54:07 GMT^M Server: Apache/2.0.53^M Content-Type: text/plain; ch****t=ISO-8859-1^M X-Cache: MISS from cache1.qsi.net.nz^M Connection: close

If the emuproxy2 was working properly the 2nd 'HTTP Header' line should be 1.1 and not 1.0 still. It's ok for the 'Uploading Header' line to show 1.0.

Perhaps the hack has not been implemented on the NZ server.

Peter.

[sadrake]

As you suggested trying the Dev server I changed rc.sysinit.author to point at the dev server and added the port and rebooted

emuProxy2 -s 210.48.107.133 -p 8000 &

It has gone through and downloaded the guide data - so happy days. I was almost ready to switch back to xtra (as much as I hate telecom at least their service worked for all of my equipment)

Seeing as this worked it tells me that emuproxy was working correctly when I was pointing it at the production emulator but for some reason still did not work. As peter mentioned maybe the hack has not been implemented on it yet?

[DJC]

Its an interesting little experiment, and handy to know that an emulator on a port other than 80 is a useful thing. Welcome to the dev emulator setup, presume you have logos slices and so on now, data updates daily ~ any issues post them into the dev forum so we don't get confused.

Cheers/DJC