I recently setup an FTA satellite reciever (Vistar 2000) I'm planning on rolling my own guide data here in the states for this, but first I need to get the Tivo to be able to change channels on the reciever. I have been unsuccessful in getting the the IR blasters to change any of my equipment. I would like to try the serial cable, as I have an rs232 port on the back of my reciever.

Does anybody know what I need to change the Componetcode to in order to enable the Serial -MPG without re-running guided setup?

Here are a few snapshots of my setup:

These are my two sources: the first on is my OTA rf tuner, the second is my FTA reciever.

Setup 13604/10 {
Version = 18
Source = 13604/12 13604/22
IndexPath = /Setup
}

Here is the stb source I added:
SignalSource 13604/22 {
ProviderName = {TiVo Composite Input}
SignalType = 5
Connector = 3
VariableBitrate = 0
RecieverNumDigits = 3
TunerDigitDelay = 150
UnattendedTunerDigitDelay = 800
DBSRemoteMethod = 2
Channel = 13604/23
CableBoxCodeNum = 30067
}

Again, I'm really hoping to avoid re-running guided setup if at all possible.

Thanks,
Keln