Time to get my UK Tivo re-connected...

[watling]

I'm most of the way thru setting up a UK model, but it can't see any signal in any of the inputs.... It doesn't show that is trying to read via SCART, but I thoght one of the other options might have worked... Any clues?

[petestrash]

I thought OzTiVo 3.0r1.4 was pretty much plug & play on the UK TiVo's as well.

But you may have to change the connector number for your source in the MFS to get a picture.

assuming you have tivoweb up and going

type http://xxx.xxx.xxx.xxx/mfs/Setup

Then click on the hyperlink next to 'source =' and post the results back here.

Peter.

[tarx]

I ran the OzTivo 1.3 & 1.4 images on my UK Tivo for a few months which worked quite well, but I found my Tivo would freeze up about once a week. I decided to rebuild the Tivo using the UK image on OzTivo (2.5.5) and set up the source, headends etc and loadguide manually (with quite a lot of undocumented experimentation was required). My UK Tivo has been running absolutely rock solid since then.

I am have my headends setup for Telstra Saturn and have an image and a briefly documented setup process if they help?

Cheers, tarx

[watling]

I am have my headends setup for Telstra Saturn and have an image and a briefly documented setup process if they help?

Cheers, tarx

Yes, please post, or email what you have learnt. I have the VCR input working ok, but had trouble trying to get the ir blaster to drive the Sony video.

I want to use the tuner, There seems to be various version of the palmod thing around, the one on the oz image, a NZ version, and a newer one again on the OX site available for download. The changes I made with the standard installed one didn't seem to stick when I tried to use the fine tuning options, although I'm not certain I know the frequencies I am aiming for.

I would like to use the NZ listings that seem pretty good, and am tinkering now withhow to change the headend side here.

I still don't really understand where this information is stored and how it ties in with the slices, Are there any diagrams out there they explain what is where and what looks at what to do what it does?

[Darren King]

I thought OzTiVo 3.0r1.4 was pretty much plug & play on the UK TiVo's as well. But you may have to change the connector number for your source in the MFS to get a picture.

Nope. Last time I tried it worked OK.