Thanks. Just to get some clarification - What does "out of luck" mean exactly? Can a server be attached to Channel 60 manually? Or would a complete new guided setup do the trick?
Thanks. Just to get some clarification - What does "out of luck" mean exactly? Can a server be attached to Channel 60 manually? Or would a complete new guided setup do the trick?
I can create a S3-Newcastle-Prime7HD with guide data in it. But unless the oztivo mothership emulator sends that out with the same tivoid number that your tivo is looking for on channel 60, then your tivo won't see it.
So to make this work, I need that number. At this point I think your best bet is to try to find someone else in Newcastle (or nearby) with a TiVo and get them to run station_debug.tcl.
I don't think a guided setup would help, but I'm not really sure.
Although as hidefdave is seeing, even with a /Server/ number from station_debug.tcl you may not get guide data coming through.
Thankfully I have a second TiVo in the household, and Ch 60 has a server attached:
01/25:11:16:28: /hack/bin/station_debug.tcl: Channel:60, Name:{PRIME7 HD Newcastle}, TransportID:2480
01/25:11:16:28: /hack/bin/station_debug.tcl: /StationTms/10002599:1c58 /Server/125549489
However, it also does not show any EPG data, so no difference.
Is this helpful? Could a new channel scan add the server? I don't really understand how servers are allocated to each channel.
Needless to say that this is quite annoying, as the few HD channels are clearly preferable when available.
I Have The Same Issue In Gippsland
No Guide Info for prime 7 HD (To Be Announced Only Showing)
01/21:21:54:26: /hack/bin/station_debug.tcl: Channel:60, Name:{PRIME7 HD Traral gon}, TransportID:2461
01/21:21:54:26: /hack/bin/station_debug.tcl: /StationTms/10002766:1c56 /Server/ 128225421
01/21:21:54:26: /hack/bin/station_debug.tcl: Channel:61, Name:{PRIME7 Traralgon }, TransportID:2461
01/21:21:54:26: /hack/bin/station_debug.tcl: NO STATION
01/21:21:54:26: /hack/bin/station_debug.tcl: Channel:62, Name:7TWO, TransportID :2461
01/21:21:54:26: /hack/bin/station_debug.tcl: /StationTms/10004948:6a6dd /Server /157634525
01/21:21:54:26: /hack/bin/station_debug.tcl: Channel:63, Name:7mate, TransportI D:2461
01/21:21:54:26: /hack/bin/station_debug.tcl: /StationTms/10006372:5490b5 /Serve r/171172996
01/21:21:54:26: /hack/bin/station_debug.tcl: Channel:65, Name:ishoptv, Transpor tID:2461
01/21:21:54:26: /hack/bin/station_debug.tcl: NO STATION
01/21:21:54:26: /hack/bin/station_debug.tcl: Channel:66, Name:7flix, TransportI D:2461
01/21:21:54:26: /hack/bin/station_debug.tcl: NO STATION
01/21:21:54:27: /hack/bin/station_debug.tcl: Channel:68, Name:RACING.COM, Trans portID:2461
01/21:21:54:27: /hack/bin/station_debug.tcl: /StationTms/10006802:549138 /Serve r/334072732
01/21:21:54:27: /hack/bin/station_debug.tcl: Channel:80, Name:{WIN HD}, Transpo rtID:12925
01/21:21:54:27: /hack/bin/station_debug.tcl: /StationTms/10006966:549187 /Serve r/341062296
01/21:21:54:27: /hack/bin/station_debug.tcl: Channel:81, Name:ONE, TransportID: 12925
01/21:21:54:27: /hack/bin/station_debug.tcl: /StationTms/10003385:54903b /Serve r/150520274
01/21:21:54:27: /hack/bin/station_debug.tcl: Channel:82, Name:ELEVEN, Transport ID:12925
01/21:21:54:27: /hack/bin/station_debug.tcl: /StationTms/10002454:1c78 /Server/ 120868662
01/21:21:54:27: /hack/bin/station_debug.tcl: Channel:83, Name:{WIN NETWORK}, Tr ansportID:12925
01/21:21:54:27: /hack/bin/station_debug.tcl: NO STATION
Also Still No 7Flix Guide.
Thanks
Prime7 HD in Gippsland should be fixed at the OzTiVo end in the last few hours.
I hope you will see it after your tivo next connects to tivo service then wait a few hours for your tivo to index the guide data it receives.
Although this is effectively the same thing I did for Ballarat/Western Vic, and I haven't had any positive reports from there about Prime7 HD.
I have stopped the guessing thing because I realised it could cause trouble for other regional Vic, and put 7flix Gippsland back to 377512910.
I'm out of ideas for 7flix Gippsland, sorry.
Hi,
No roll of the dice here for the guide for Prime7 HD. Gippsland Loaded / downloaded It 6 times since 3 am yesterday and no guide has appeared to date.
Thanks for trying though , i guess down the track it may appear.
Can someone tell me if the guide for postcode 2450 now works or not?
I am using 2000 as previously suggested, but would like to get a guide for channel 61 Prime 7 off of Mt. Moombil, as naturally, it won't get the epg for that channel.
I see references on doing a rebug(??) but have not yet seen how to do this process.I will keep searching.
Thanks
The guide data will not (currently) change depending on what post code you put into guided setup, as long as it is an Australian post code which oztivo knows about.
That's right the post code makes no difference whatsoever to what guide data you receive. (Although we do intend to change that at some point in future.)
So I think the question you are asking is "Why don't I see guide data for Prime channel 61 in Coffs Harbour?"
The answer is OzTiVo thinks there is a Prime channel 6 in Coffs Harbour, but no Prime channel 61. In fact OzTiVo thinks there is no channel 61 anywhere in Australia.
If someone can post output from /hack/bin/station_debug.tcl run on a tivo in/near Coffs Harbour, then I can check whether it has station details for channel 61.
A previous station_debug.tcl output from Coffs Harbour:
http://forums.oztivo.net/showthread....8554#post18554
had "NO STATION" for channel 61, which doesn't help.
Also, if there are details (with server id) for channel 60 (Prime7HD) in Coffs Harbour then I could fill that in when I'm doing Prime7HD for Ballarat and Gippsland.
In the short term, can you just use channel 6 instead of channel 61?
Thank you for the reply, I appreciate it, and want to supply the information needed, but as I said on my first post
I see references on doing a rebug(??) but have not yet seen how to do this process
Can someone give me a hint what to do to get the info needed to assist me?
Thank you.
Hi viewer,
There is some more info on our issues here: http://forums.oztivo.net/showthread....ing-guide-data
There is also info further back in this thread about how to do a station debug, but it sounds like its not going to provide any more info toward getting it working until DavidKeegal tests his theory.
Cheers,
hdd.
Bookmarks