Prime7 HD EPG data (Channel 60)

[DavidKeegel]

01/21:00:26:07: /hack/bin/station_debug.tcl: Channel:60, Name:{PRIME7 HD Newcastle}, TransportID:2480
01/21:00:26:07: /hack/bin/station_debug.tcl: NO STATION

No /Server/ number there. Sorry you're out of luck for now.

For Ch 31, it would be nice if it said SBS Viceland HD.

I don't think that name is coming from our OzTiVo mothership emulator, or if it is then I don't know from where. Sorry again.

[jesi]

Thanks. Just to get some clarification - What does "out of luck" mean exactly? Can a server be attached to Channel 60 manually? Or would a complete new guided setup do the trick?

[DavidKeegel]

Thanks. Just to get some clarification - What does "out of luck" mean exactly? Can a server be attached to Channel 60 manually? Or would a complete new guided setup do the trick?

I can create a S3-Newcastle-Prime7HD with guide data in it. But unless the oztivo mothership emulator sends that out with the same tivoid number that your tivo is looking for on channel 60, then your tivo won't see it.
So to make this work, I need that number. At this point I think your best bet is to try to find someone else in Newcastle (or nearby) with a TiVo and get them to run station_debug.tcl.

I don't think a guided setup would help, but I'm not really sure.

Although as hidefdave is seeing, even with a /Server/ number from station_debug.tcl you may not get guide data coming through.

[jesi]

Thankfully I have a second TiVo in the household, and Ch 60 has a server attached:

01/25:11:16:28: /hack/bin/station_debug.tcl: Channel:60, Name:{PRIME7 HD Newcastle}, TransportID:2480
01/25:11:16:28: /hack/bin/station_debug.tcl: /StationTms/10002599:1c58 /Server/125549489

However, it also does not show any EPG data, so no difference.

Is this helpful? Could a new channel scan add the server? I don't really understand how servers are allocated to each channel.

Needless to say that this is quite annoying, as the few HD channels are clearly preferable when available.

[DavidKeegel]

Thankfully I have a second TiVo in the household, and Ch 60 has a server attached:

01/25:11:16:28: /hack/bin/station_debug.tcl: Channel:60, Name:{PRIME7 HD Newcastle}, TransportID:2480
01/25:11:16:28: /hack/bin/station_debug.tcl: /StationTms/10002599:1c58 /Server/125549489

Is this helpful? Could a new channel scan add the server? I don't really understand how servers are allocated to each channel.

The good news: yes, that is helpful and now I that server ID number, I have configured PRIME7 HD Newcastle in the oztivo S3 database.
The bad news: when I did the same thing for Ballarat Prime7HD and Gippsland Prime7HD, I got reports back from tivo owners in those regions that they were not getting any guide info on their tivos for Prime7HD.

If it's going to work, then you should start seeing guide entries for Prime7HD when your tivo connects to the mothership (after about 2am Jan 27), loads guide info, and then indexes it over the next few hours after that.

[jesi]

The TiVo with the server attached to ch 60 still has no program information. It has updated twice since 2 am yesterday. I also noticed that program data for ch 6 is wrong, duplicating tomorrows info today (and tomorrow). Not sure what is going on, but obviously some serious issues.

The second TiVo also does not have any ch 60 info. At least the ch 6 data is correct for today on that device.

Would be grateful for any other suggestions to try to get this fixed.

[levidog]

The TiVo with the server attached to ch 60 still has no program information. It has updated twice since 2 am yesterday. I also noticed that program data for ch 6 is wrong, duplicating tomorrows info today (and tomorrow). Not sure what is going on, but obviously some serious issues.

The second TiVo also does not have any ch 60 info. At least the ch 6 data is correct for today on that device.

Would be grateful for any other suggestions to try to get this fixed.

Is there any update on prime7 Hd Guide Update?
Still have none thus far.
Cheers!