Prime7 HD EPG data (Channel 60)

[boritz]

... know how to telnet or ssh your tivo ...

1. Find the IP address of your TiVo, it is found in Messages & Settings > Settings > Network.
- it will look something like 192.123.456.3 or 10.0.0.5 etc, etc.

2. You need a PC or laptop (etc) connected to the same network as your TiVo.

3. Open (run) a command-line prompt window on your PC - some examples here https://www.howtogeek.com/235101/10-...in-windows-10/

4. Type "telnet 10.0.0.5" <Enter>
- don't type the quotes " and type your TiVo's actual IP address. <Enter> means press the Enter key.

5. The TiVo will respond with S3-tivo/hack $

6. Type "/hack/bin/station_debug.tcl" <Enter>
- the slashes (i.e. / ) are required - see the ? key (unshifted).

7. After a while (be patient) the TiVo will list its channel info.

8. If you only want to list the entry(s) for Prime FTA channel(s) type "/hack/bin/station_debug.tcl | grep -i prime" <Enter>
- note the vertical line character (called pipe) is found using Shift-backslash (i.e. \ ). The spaces are required.

Feel free to ask if you need more detail. BTW I'm just an end user - I don't know anything about the TiVo modifications.