I could never get it to work, so I ended up building a hardware interface based on a ripped apart IQ remote, and a small interface board produced by another member here.
It was a bit of work, and you do need to understand a bit about electronics, but it works 100% and now I don't have to deal with that useless IQ user interface.
Have a look at this thread for some info.
http://forums.oztivo.net/showthread....-Mystar-Advice
Cheers
Rohan
Please advise if it is possible now to use Tivo S1 IR blaster to control channel change on Foxtel IQ successfully? or if there is any way around it ?
Another issue I have is that when trying to enter "recorder and phone set up" menu, TIVO (Phillip, Oztivo 1.63) it knocks me straight back without allowing me to select various options. I am stuck with the options selected at Guided set up.
Many thanks for any help you can give.
Ok, the IQ issue still exists and cannot be fixed on the TiVo. It requires the workaround linked to in previous posts.
The 2nd issue is much simpler. and is explained in our problems and solutions FAQ under the title "I can't access "Recorder & Phone Setup", it just comes back to the menu again.".
Also look at http://www.oztivo.net/twiki/bin/view...edoGuidedSetup
Peter.
Bookmarks