Must be a lagacy problem, broke. Main emulator looks good at this point, just checked a slice off it.
yep .. same on legacy port 80
massive gaps
Must be a lagacy problem, broke. Main emulator looks good at this point, just checked a slice off it.
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
I don't think so djc as both myself and neilp are on 8000
PM me your tivo ID thanks.
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
Well that's odd. Tuesday was the last call, as thats when I gave up force phoning because I wasn't getting any data.
Looks all alright now though.
Thanks once again for your time DJC.
Cheers, Phil
all seems well on legacy now
how do I get my tivo ID btw?
To get your Tivo id, its the Tivo service number in the information screen of the setup menu.
OK, good to heat the legacy emulator righted itself, likely some bad source data came through the system.
A warning, the legacy emulator is at the point of no support. The headends are dated and not maintained. Who knows it may continue to work, but if its slicing engine breaks that will be it, we are on a new codebase now.
The new emulator has been in place for more than two years now - the recommendation remains is to switch. And there are some good benefits in doing so, up to date headends, some episode structures, better data and so on.
Good luck.
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
Are the IR codes in the new installer? I had a wicked drama with IR codes (crikey has it been more than 2 years ?!?!? )
Got some drives kicking about .. my do a clean install on a new drive
The NZ emulators carry the oztivo IR slice, so you should be right. Check on the forums to see if someone has or knows about your codes.
1 x Philips TiVo Series 1, Cachecard, 1 x 1TB SATA (with recent TradeMe sourced adaptor), Mk II Pal Tuner Mod, NZ Emulator, Previously Dual A/V Source, Now Pay Satellite
2 x TiVo HD, Freeview, HNP, 2TB (WD-AV) jmfs upgraded
1 x Thomson UK TiVo, Cachecard, 200GB, Testing Work
Bookmarks