Modifying FTA Channel Frequencies
Hi there
I have a UK Tivo running 2.5.5 that I have modified to run in NZ. I tried the OZTivo image a year or so ago, but the image tended to lock up the tivo every so often so I set about modifying the UK image myself. This has taken a bit of time and each mod involves backing up the box before the next changes. This has something to do with my lacking linux skills.
Anyway - my issue is that I want to be able to record TV1, 2 AND TV3 via the RF tuner and the other sky channels via the scart input. This is so I can record FTA and watch sky channels at the same time.
I can get and record TV1, but TV2 appears on TV3 and TV3 on channel 10 (which is used by sky sport). I need to know where in Tivo config files it gets this information. I've played around with the freq settings in Palmod but it doesn't change anything.
Once I get them right, and it connects and downloads the new slice, the channels revert back to the wrong place again.
I also tried a dodgy script that ran as a cron to change the number every half an hour, but this isn't very reliable.
Has anyone managed to get a workaround or can give me some ideas of where I need to be looking
Thanks
Modifying FTA Channel Frequencies
Hi there
Thanks for the quick response. I would like to take you up on the offer of a binary file if it isn't too much hassle.
I'm only interested in TV1, 2 and 3 and I live in Hamilton if that is any use to you.
Currently they sit as follows:
1=TV1,3=TV2 and 10=TV3 and I would like them mapped as 1=TV1, 2=TV2 and 3=TV3
Out of curiousity, what is involved in compiling a new .o file. I assume you take a .c file and run something on it that creates a .o file. Is it easy? Do you run this on Tivo or just in a standard linux/unix OS
Thanks Marty